公司新聞
冷再生機出租正確操作使用流程？
來源：http://www.dj1688.cn/ 日期：2020-08-28
冷再生機是工地作業中常用的一種機械。可以有效的幫助施工的工人們加快工作效率和提高工程質量。冷再生機是一種高效率、多用途的施工機械。主要用于瀝青混凝土路面的銑刨以及添加瀝青、水等材料后的舊瀝青路面的再生。也可用于公路、城鄉道路、機場、碼頭、停車場等工程的基層、底層穩定土現場就地拌和作業。那么大家了解它正確的操作方式嗎？下面冷再生機出租的小編和大家分享一下。
Cold regenerator is a kind of machinery commonly used in construction site. It can effectively help the construction workers to speed up the work efficiency and improve the quality of the project. Cold regenerator is a kind of high efficiency, multi-purpose construction machinery. It is mainly used for milling of asphalt concrete pavement and regeneration of old asphalt pavement after adding asphalt, water and other materials. It can also be used for on-site mixing of stabilized soil at the base and bottom of highway, urban and rural roads, airports, wharves, parking lots and other projects. So do you know how it works? The following cold recycling machine rental small editor and everyone to share.
1.使用后控制臺時，需將開關撥到后控制，此時前控制臺無作用，此外各個小噴頭開關可以使用后控制臺打開、關閉。
1. When using the rear console, turn the switch to the rear control. At this time, the front console does not work. In addition, each small nozzle switch can be opened and closed by using the rear console.
2.乳化瀝青設備不能灌的太滿，加油口蓋必須關緊，運輸過程中以防瀝青溢出。
2. The emulsified asphalt equipment cannot be filled too full, and the filler cap must be closed tightly to prevent asphalt overflow during transportation.
3.乳化瀝青設備在噴灑前一定要檢查各閥門位置是否正確。加入乳化瀝青設備內的熱態瀝青必須達到160~180℃的工作溫度，長距離運輸或工作時間過長，可使用加溫裝置保溫，但不能當作熔油爐。
3. Before spraying emulsified asphalt equipment, check whether the valve position is correct. The hot asphalt added into the emulsified asphalt equipment must reach the working temperature of 160 ~ 180 ℃. If the asphalt is transported for a long distance or the working time is too long, the heating device can be used for heat preservation, but it can not be used as an oil melting furnace.
以上就是關于冷再機的正確操作方式的介紹，希望對大家有所幫助。如您還有其他疑問歡迎咨詢冷再生機http://www.dj1688.cn網站！
The above is the introduction of the correct operation mode of the chiller, hoping to help you. If you have other questions, please consult the cold regenerator http://www.dj1688.cn Website!
公司地址：濟南市槐蔭區經一路273號群盛華城2號樓1-404
公司名稱：山東途暢路橋工程有限公司 
備案號：