公司新聞
冷再生泡沫瀝青冷再生機出租施工的技術有哪些？
來源：http://www.dj1688.cn/ 日期：2020-10-19
瀝青冷再生技術，其實就是將泡沫瀝青的一些優良性能應用于實際應用的技術。與傳統工藝相比，在實際應用中效果較好。但是，用戶要想充分發揮技術優勢，在實際施工過程中需要遵循以下流程：
The cold recycling technology of asphalt is actually a technology that applies some good properties of foamed asphalt to practical application. Compared with the traditional process, the effect is better in practical application. However, in the actual construction process, users need to follow the following technical advantages:
在施工過程中，冷再生租賃過來以后，首先需要用銑刨機將要進行鋪設的瀝青面層清洗干凈。需要大修的路面要磨平到基層。廢料可由裝車車重新裝車回用，然后鋪設泡沫瀝青混凝土。需要注意的是，這些冷再生技術在鋪筑新路面過程中不受天氣條件的限制，即使在寒冷的天氣和雨天，仍能進行施工。單從這點就可以看出，它在當今市場上的應用非常廣泛。
In the construction process, after the cold recycling lease, the asphalt surface course to be paved shall be cleaned with a milling machine. The pavement to be overhauled shall be ground to the base. The waste can be reloaded by the loading car, and then the foamed asphalt concrete will be laid. It should be noted that these cold recycling technologies are not limited by the weather conditions in the process of paving new pavement, even in cold weather and rainy days, construction can still be carried out. From this point we can see that it is widely used in today's market.
以上是泡沫瀝青在施工過程中的冷再生工藝流程。只要用戶按照上述工藝進行路面攤鋪，那么它的效果必然就是有保證的。
The above is the cold recycling process of foamed asphalt in construction. As long as the user carries on the pavement paving according to the above technology, then its effect must be guaranteed.
在實施一個項目時，需要進行質量控制，以確保效果。那么，如何控制冷再生的質量呢?為保證冷再生租賃的質量控制，應遵循以下三點：
In the implementation of a project, quality control is needed to ensure the effect. Then, how to control the quality of cold regeneration? In order to ensure the quality control of cold regeneration leasing, the following three points should be followed:
1、原材料的各項試驗要在施工前進行，檢驗合格后方可使用。施工前應對混合料進行各種試驗，確認材料無變化后方可施工。
1. All tests of raw materials should be carried out before construction and can be used only after passing the inspection. Before construction, all kinds of tests should be carried out on the mixture, and the construction can be carried out after confirming that the materials have no change.
2、施工過程中，應隨時檢測混合料中粘結劑和外加劑的含量，確保施工質量。
2. During the construction process, the content of binder and admixture in the mixture should be detected at any time to ensure the construction quality.
3、在施工過程中，應根據混合料的拌和性和可加工性及時調整耗水量。
3. In the construction process, the water consumption should be adjusted timely according to the mixing and processability of the mixture.
以上是關于冷再生泡沫瀝青冷再生機施工的技術的介紹，希望對大家有所幫助，如想了解更多內容請多多關注我們的網站。
The above is about cold recycling foam asphalt cold recycling machine construction technology, hope to help everyone, if you want to know more content, please pay more attention to our website.
公司地址：濟南市槐蔭區經一路273號群盛華城2號樓1-404
公司名稱：山東途暢路橋工程有限公司 
備案號：